USD $ 685.00 USD $ 1489.00 USD $ 134.00 USD $ 479.00 USD $ 399.00 USD $ 655.00 USD $ 1250.00 USD $ 764.90
B3 20W simple balance charger is the best solution 2S-3S battery, because it is light and exquisite, 20W maximum power, charging current, AC function, especially the separation corresponding balance port for each battery pack. It is very appropriate remote control cars and helicopters.
Performance and size parameters:
Input voltage: AC 110V-240V
balancing charging current: 1600mA
Charging Power: 20W
Size: 92mm x 59mm x 35.5mm
Enclosure Material: Plastic
Display: green and red LED lights
1. First, connect the power source B3, and three LED lights will turn green, indicating that the charger is in good condition.
2. Next, connect 2S or 3S battery balancing port and LED light turns red, it starts charging the battery. Please note that if a battery is fully charged, the corresponding LED light will turn green.
3. All the LED lights turn become green, the end of the charging process. Please terminate the charging process.
1. Only use the charger and battery type. Do not attempt to other types of batteries. The charger is not compatible, LILO or NiMH / NiCd batteries.
2. Observe any warnings your battery.
3. Please observe the charger process. If you find any faults, immediately terminate the process.
4. Keep the charger away from moisture, dust, dirt, heat, direct sunlight and vibration.
5. All connections to start before the charging process. Not reverse polarity connection.
6. The charger and battery charge should be placed on a heat-resistant, non-flammable and non-conductive surface. Do not put them on the car seat, carpet or similar. Keeping combustible materials away from the work area.
9. Avoid short circuit between the output of the power cable input connector, always connect the charger adapter cable, and then give the battery charge. When the reverse sequence, disconnected.
B3 Charger x 1
AC power cord x 1
English manual x 1